Product manual

Chapter 3: Setup
45
Figure 6. The configuration wizard
Automatic
When you choose the Automatic option, the following parameters appear on the
screen:
• Disk Arrays – The number of logical drives, number of physical drives, ID of
each physical drive, configurable capacity, and the media type (hard disk
drives or solid state drives).
• Logical Drives – The ID numbers of the logical drives, their RAID levels,
capacity, sector size, and stripe size.
• Spare Drives – The ID numbers of the logical drives, type (global or
dedicated) revertible option (enabled or disabled) and media type. A hot
spare drive is created for all RAID levels except RAID 0, when five or more
unconfigured physical drives are available
If you do NOT accept these parameters, use the Express (below) or Advanced
(page 47) option to create your disk array.
If you accept these parameters, click the Submit button, and then click the
Finish button.
The new disk array appears in the Disk Array List on the Storage tab, Disk Array
option.