Product manual

Chapter 3: Setup

4. Choose the initiators you want to use from the dropdown menu and click the

Next button.

The screen displays a list of initiators and a list of logical drives.

5. Click and drag a logical drive from the logical drives list to the initiators list.

6. Click the Next button when you are done.

The screen displays a list of initiator IDs and corresponding LUN maps that

you specified.

7. Click the Submit button to create the LUN map.

The screen displays a list of initiator IDs and corresponding LUN maps.

You can also set LUN mapping and masking at a later time. Click the

AdminTools tab, then click the LUN Mapping & Masking option.

Logging out of WebPAM PROe

There are two ways to log out of WebPAM PROe:

• Close your browser window

• Click Logout on the WebPAM PROe banner

Figure 7. Clicking “Logout” on the WebPAM PROe banner

Clicking Logout brings you back to the Login Screen. See page 43.

After logging out, you must enter your user name and password in order to log in

again.

Using WebPAM PROe over the Internet

The above instructions cover connections between VTrak and your company

network. It is also possible to connect to a VTrak from the Internet.

Your MIS Administrator can tell you how to access your network from outside the

firewall. Once you are logged onto the network, you can access the VTrak using

its IP address.