Product manual

Chapter 4: Management with WebPAM PROe

This chapter contains the following topics:

• Logging into WebPAM PROe (below)

• Choosing the Display Language (page 53)

• Perusing the Interface (page 55)

• Logging out of WebPAM PROe (page 57)

• Viewing the Storage Network (page 58)

• Managing Subsystems (page 59)

• Managing RAID Controllers (page 69)

• Managing Enclosures (page 76)

• Managing UPS Units (page 80)

• Managing Users (page 83)

• Managing Background Activities (page 90)

• Managing Storage Services (page 100)

• Monitoring Performance (page 111)

• Managing Physical Drives (page 114)

• Managing Disk Arrays (page 121)

• Managing Logical Drives (page 132)

• Managing Spare Drives (page 141)

• Managing LUNs and Initiators (page 146)

• Managing Fibre Channel Connections (page 149)

• Managing SAS Connections (page 153)

Logging into WebPAM PROe

1. Launch your browser.

2. In the browser address field, type in the virtual IP address of the VTrak

subsystem.

Use the virtual IP address you set in the CLI (page 32) or CLU (page 34).

Note that the IP address shown below is only an example.

Regular Connection

• WebPAM PROe uses an HTTP connection. . . . . . . . . . . . . . . .http://

• Enter the IP address of the VTrak . . . . . . . . . . . . . . . 192.168.10.85

Together, your entry looks like this:

http://192.168.10.85