Product manual

Chapter 4: Management with WebPAM PROe
67
5. Click the Submit button.
6. In the Open dialog box, click the Save File option, then click the OK button.
The file is saved to your PC as “Configscript.txt”.
Restarting a Subsystem
This function shuts down the subsystem and then restarts it.
To restart the subsystem:
1. Click the AdminTool tab.
2. Click the Subsystem Information icon.
3. Click the Shutdown/Restart button.
4. Click the Restart button.
5. Type “confirm” in the field provided.
6. Click the Confirm button.
When the controller shuts down, your WebPAM PROe connection is lost.
7. Wait no less than two minutes.
8. In your browser, click Logout in the WebPAM PROe Header, then log in
again.
If you cannot log in immediately, wait 30 seconds and try again.
Shutting Down the Subsystem
This function shuts down the RAID subsystem without restarting it.
To shutdown the subsystem:
1. Click the AdminTool tab.
2. Click the Subsystem Information icon.
3. Click the Shutdown/Restart button.
4. Click the Shutdown button.
5. Type “confirm” in the field provided.
Caution
Do NOT attempt to write or modify a configuration script until you
receive guidance from Technical Support. See page 351.
Important
Do NOT turn off the power supply switches on the RAID
subsystem or JBOD expansion units.