Product manual

Chapter 4: Management with WebPAM PROe
77
Viewing Enclosure Information
To view enclosure information:
1. Click the Device tab.
2. Click the Component List icon.
3. Mouse-over the Enclosure and click the View button.
Enclosure information includes:
•Enclosure ID
• Enclosure Type
• Enclosure Warning Temperature Threshold
• Enclosure Critical Temperature Threshold
• Controller Warning Temperature Threshold
• Controller Critical Temperature Threshold
• Max Number of Controllers
• Max Number of Physical Drive Slots
• Max Number of Fans
• Max Number of Blowers
• Max Number of Temperature Sensors
• Max Number of Power Supply Units
• Max Number of Batteries
• Max Number of Voltage Sensors
For information on Enclosure problems, see See “Diagnosing an Enclosure
Problem” on page 308.
Making Enclosure Settings
To make Enclosure settings:
1. Click the Device tab.
2. Click the Component List icon.
3. Mouse-over the Enclosure and click the Settings button.
Enclosure settings include:
• Enclosure Warning Temperature Threshold
• Enclosure Critical Temperature Threshold
• Controller Warning Temperature Threshold
• Controller Critical Temperature Threshold
4. In the field provided, type the temperature in degrees C for each threshold
value.