Computer Hardware User Manual

Chapter 5: Management with WebPAM PRO

There are four major parts to the WebPAM PRO interface:

• Header (see page 87)

• Tree View (see page 87)

• Management View (see page 88)

• Event Frame (see page 89)

Using the Header

The Header contains the following items:

• Language – To choose a display language, see “Choosing a Display

Language” on page 89.

• Show/Hide Event Frame – To view the Event Frame, see “Viewing the

Event Frame” on page 89.

• Show/Hide Storage Network – To view the Storage Network, see “Viewing

the Storage Network” on page 90.

• Contact Us – Click here for Promise Technology contact information. Or see

“Contacting Technical Support” on page 197.

• Logout – To logout, see “Logging out of WebPAM PRO” on page 91.

Using Tree View

Tree View enables you to navigate around all components of the Host PC (where

the SuperTrak controller card is installed), software management, RAID

controller, enclosure, physical drives, disk arrays, logical drives, and spare

drives. The figure below shows the components of Tree View.