- PROMISE TECHNOLOGY FAST TRAK100TM User Manual

FastTrak100 User Manual

1. After assigning the drives to a Mirroring array, press <Ctrl-Y> keys to Save

your selection. The window below will appear.

Do you want the disk image to be duplicated to another? (Yes/No)

Y - Create and Duplicate

N - Create Only

2. Press “Y” for the Create and Duplicate option. The window below will appear

asking you to select the Source drive to use. FastBuild will copy all data from

the Source drive to the Target drive.

Source Disk

Channel:ID Drive Model Capacity (MB)

Target Disk

Channel:ID Drive Model Capacity (MB)

[Please Select A Source Disk]

Channel:ID Drive Model Capacity (MB)

1 :Master QUANTUMCR8.4A 8063

2 :Master QUANTUMCR8.4A 8063

[↑] Up [↓] [ESC] Exit [Ctrl-Y] Save

3. Use the arrow keys to choose which drive contains the existing data to be

copied.

WARNING: All target drive data will be erased. Make sure you choose

the correct drive.

4. Press [Ctrl-Y] keys to Save selection and start duplication. The following

confirmation screen will appear.

Start to duplicate the image . . .

Do you want to continue? (Yes/No)

Y – Continue N - Abort

5. Select “Y” to continue. If you choose “N” , you will be returned to step 1.

6. Once “Y” is selected, the following progress screen will appear. The process

will take a few minutes.

Please Wait While Duplicating The Image

10%

Complete