- PROMISE TECHNOLOGY FAST TRAK100TM User Manual

FastTrak100 User Manual
36
Microsoft Millennium
Installing Drivers During Millennium Installation
The following details the installation of the FastTrak100 drivers while installing
Microsoft’s Millennium (with the FastTrak100 controller card already in place). If
you’re installing the FastTrak100 drivers on a system with Millennium already
installed, see “Installing Drivers with Existing Millennium System.”
1. Install Microsoft Millennium fully.
2. After installation, go the “Start” menu and choose “Settings.”
3. From the “Settings” menu, choose “Control Panel.”
4. In the “Control Panel” window, double-click on the “System” icon.
5. In the “System” window, choose the “Device Manager” tab.
6. In the hierarchical display under “Other Devices” is a listing for “PCI RAID
Controller.” Choose it and then press the “Properties” button.
7. Choose the “Driver” tab in the “Properties” window, choose “Update Driver,”
and then press “Next.”
8. Choose “Search for a better driver than the one your device is using now
(recommended),” then press “Next.”
9. Choose “Specify Location,” and then type “A:\WINME” in the text box.
10. Insert the “FastTrak100 Driver” diskette into the A: drive.
11. Press the “Next” button. A message informing you that Windows Millennium
has found “Windows Millennium Promise FastTrak100 Controller” should
appear.
12. Press “Next,” then “Finish,” then “Yes” when asked if you want to restart
your computer. Be sure to remove the diskette from drive A:.