User manual

FastTrak TX2000™ Series User Manual

Viewing Controller Settings

The Controller Configuration <6> menu selection allows you to enable or disable the FastTrak

TX2000 BIOS from halting (the default) if it detects an error on boot up. You may also view the

system resources (Interrupt and I/O port address) of FastTrak’s data channels.

[ Adapter Configuration - Options ]

Halt On Error: Enable

[ System Resources Configuration ]

Channel 1 (IDE1) Interrupt : A I/O Port : FFF0

Channel 2 (IDE2) Interrupt : A I/O Port : FFA8

[ Keys Available ]

[←, →, Space] Change Option [ESC] Exit

Halting FastTrak BIOS On Bootup Errors

The [Adapter Configuration – Options] section allows you to enable or disable FastTrak TX2000

to Halt operation at the BIOS startup screen should an error be detected. This is the only option

that can be changed on this screen.

Viewing FastTrak System Resources

The [System Resources Configuration] section of this submenu displays the PCI slot interrupt

and port address used by the FastTrak TX2000. The resources used are determined by the

Mainboard PCI PnP BIOS for the PCI slot in which the FastTrak TX2000 resides.

In the rare case that there is a resource conflict, refer to the Mainboard BIOS documentation on

changes on resources allocated to the FastTrak TX2000 PCI slot.