User manual

Chapter 5: Monitoring and Maintenance
49
Delete a Message Server
If the Server’s IP address has changed, it will no
longer function. You must delete the existing Server
and create a new one with the current IP address.
1. Right click on the Message Server icon
in
Tree View.
2. Select Delete from the popup menu (right).
Disconnect a Message Server
Logout of RAID Server
When you are about to perform maintenance or repair on a RAID server, use
this procedure. This action will preserve your connection settings. PAM will
still see the Message Server and show a disconnected status.
Caution
This is the only correct way to log out a RAID Server from
the system.
To disconnect a Message Server, select it in Tree View then click the
Disconnect button
in the Toolbar, or:
1. Right click on the Message Server icon
in Tree View.
2. Select Disconnect from the popup menu (right).
Reconnect a Message Server
To reconnect a message Server you have taken
offline, select it in Tree View then click on the
Connect button
in the Toolbar, or:
1. Right click on the Message Server icon
in
Tree View.
2. Select Connect from the popup menu (right).