FastTrak TX Series User Manual

Chapter 2: Installation

Create Your Logical Drive

You will now use the onboard FastBuild BIOS utility to create a logical drive with

the attached drives.

For an explanation of the logical drive concepts, see Chapter 6

1. Boot your system. If this is the first time you have booted with the FastTrak

card and drives installed, the Promise onboard BIOS will display the

following screen (below).

2. Press the Ctrl-F keys to display the FastBuild Utility Main Menu (below).

3. Press 2 on the Main Menu screen to display the Define LD Menu (below).

Note

You can omit this step, proceed with the WebPAM installation on

page 15, then create your logical drive using WebPAM. See

“Create a Logical Drive” on page 67.