FastTrak TX Series User Manual

FastTrak TX2200, TX2300 User Manual
38
The Source Disk Selection screen displays:
8. In the Source Disk Selection screen, press the arrow keys to highlight the
source disk and press Enter.
The following message displays:.
9. Press Y to create a RAID 1 logical drive creation using the Create and
Duplicate option.
The following message displays:.
Duplication takes several minutes, depending on the size of your disk drives.
If you press N, Fast Build will create a regular RAID 1 logical drive.
Caution
Be sure you select the drive with the data as the source disk. If
you select the wrong drive, all of your data will be lost.