FastTrak TX Series User Manual

FastTrak TX2200, TX2300 User Manual

11. For RAID 0 logical drives, select a Stripe Block Size of 32 KB, 64 KB, or

128 KB. 64 KB is the default.

See “Stripe Block Size” on page 96 for more information.

12. Select an Initialization policy from the dropdown menu.

• Fast Initialization – Erases the Master Boot Record (MBR) of the

physical drives being added to the logical drive.

• Full Initialization – Erases all sectors of the physical drives being

added to the logical drive.

• None – No initialization. This choice is not recommended.

13. Click the Finish button.

If there are physical drives available, the Select RAID Level screen appears

again, where you can create an additional logical drive.