User guide

3. Operating WebPAM PRO
This chapter describes how to start WebPAM PRO and how to operate the screens to be
displayed.
3.1 Starting and Exiting WebPAM PRO
IMPORTANT:
 Do not start more than one Web browser for a specific controller at a
time.
 Each time WebPAM PRO is started, the security warning screen is
displayed. Click [Yes] to display the logon screen. The security warning
screen will appear again at the next start even if you install the
certification.
 Opening the WebPAM PRO screen with Internet Explorer 7 causes a
[Certificate Error] to appear at the top of Internet Explorer. This has no
effect on WebPAM Pro operation.
 When using Internet Explorer 7, a certificate warning is always
displayed on the upper right of the Internet Explorer screen. This has no
effect on WebPAM Pro operation.
 The default user name and password are "administrator" and
"password," respectively. At the first logon, enter "administrator" and
"password" in the user name and password fields. To change the
administrator’s password after the logon, see "3.4 Managing Users." The
user name and password for logon to WebPAM PRO are accounts
exclusively used for WebPAM PRO. They are different from the user
name and password used to log on to the OS.
 The “crypt32” error message with ID:8 may be registered in the
application log at WebPAM PRO startup. This has no effect on WebPAM
PRO operation.
 When you start WebPAM PRO first time, messages with the date of
1970s may be registered. This has no effect on WebPAM PRO operation.
NOTES:
 Depending on the operating system, browser and/or
color scheme you use, the screens appearing on your
monitor may look different than the captures shown in
this manual.
 If you attempt to start WebPAM PRO and it is the first
time Internet Explorer is started on this server, the
Connection to Internet screen may be displayed. In
this case, perform the relevant Internet Explorer
- 15 -