User guide

3.1.2 Controlling WebPAM PRO with a Remote Computer
1. Start the Web browser.
2. In the Address box on the browser screen, type the IP address of the Promise RAID
system to be controlled and press [Enter].
For example, if the IP address is [10.10.10.10], type
[https://10.10.10.10:8443/promise].
The WebPAM PRO logon screen is displayed when a session with the remote system is
established.
NOTE: If you are using a proxy server to access the
Internet, you need to bypass the proxy server. Refer to
Appendix A for more information.
3. The Security Alert window is displayed. Click [Yes].
The [Block by Security Enforcement] screen may appear. Click [Add] to register
WebPAM PRO to a zone in the trusted site.
4. Perform the following on the logon screen.
 Specify the user ID and password in their corresponding fields. (At the first logon, specify
"administrator" and "password" as the user ID and password, respectively.)
 Click [Login].
3.1.3 Exiting WebPAM PRO
Click [Logout] on the WebPAM PRO Header of the WebPAM PRO operation window to exit
the WebPAM PRO operation window. Click [x] at the upper right corner of the WebPAM PRO
logon window to exit it.
- 18 -