User guide

3.6.3 Advanced Configuration
1. Click Disk Arrays in the Tree View.
2. Click the Create tab in the Management Window and select Advanced Configuration.
Set the items in the Create tab as shown in the table below. Advanced Configuration (Step 1 -
Disk Array Creation)
Disk Array Alias Alias (any name)
Enable Media Patrol Enables media patrol. The checkbox is checked by default. For
details of the media patrol, see "3.9 Media Patrol."
Enable PDM Enables PDM. The checkbox is checked by default.
If an error occurred in any HDD in logical drive while the PDM
feature is being enabled, the data is copied onto the spare drive
automatically. Consequently, the slot location initially assigned
for a physical drive configuring logical drives may be changed.
Consideration must be taken into account to use the PDM
feature. For details of PDM, see "3.11 PDM."
Physical Drives Select the physical drives which you want to use to configure a
disk array and click the >> button to move them to the selection
list.
- 46 -