User guide

Recurrence Pattern The displayed screen varies depending on the Recurrence
Pattern selected in the previous screen.
[daily]
• [Every–days] (*unavailable)
[weekly]
• [Every–weeks] (*unavailable)
• Check the checkbox of the day of the week on which you
want to run a redundancy check.
[monthly]
• [Day of Month] Set the monthly date on which you want to
run a redundancy check.
[The] (*unavailable)
• Check the checkbox of the month during which you want to
run redundancy check.
Range of Recurrence Start from: Start date
End on–No End Date: Select this option.
–End After: (*unavailable)
–Until: (*unavailable)
Redundancy Check
Options
[Auto Fix] Set the processing to be performed when an
inconsistency error is detected.
If the checkbox is checked, data is repaired from the other
HDDs configuring RAID when an inconsistency error is
detected.
If the checkbox is not checked, the consistency error is not
repaired upon detection.
[Pause on Error] Sets whether the process is paused if an
inconsistency error is detected.
If the checkbox is checked, the process is paused if an
inconsistency error is detected.
However, if Auto Fix is also checked, the process is paused
only when the error cannot be repaired.
If the checkbox is not checked, the processing is not paused
in spite of the detection of an inconsistency error.
Note: Redundancy check without Auto Fix for a logical drive
not initialized or not subject to redundancy check in the Auto
Fix mode at all cannot be scheduled. If you try, the following
message is registered and the redundancy check is not done.
Failed to create the scheduler: Redundancy Check can not be
scheduled for the logical drive x as it is not Fully initialized or
AutoFix is not enable
In this case, schedule the redundancy check in "Auto Fix."
Apply to Redundant
Logical Drives
Check the checkboxes of logical drives for which you want to
schedule a redundancy check.
Do not use the options with “*unavailable” suffixed in the above list.
5. Once the settings are completed, click [Submit].
Click [Back] to return to the previous screen. Click [Cancel] to cancel the settings.
- 54 -