User guide

Source Physical Drive Specify the physical drive which is suspected to be defective
and from which you wish to copy the data.
Target Physical Drive Specify the physical drive to which the data is to be copied.
4. Click [Submit].
The PDM starts. It may take a long time depending on the capacity.
During the PDM execution, you can check its progress.
5. Once the process is completed, the status display of the source HDD becomes "Stale, PFA"
and the icon in the Tree View is marked with a red cross (×). We recommended you replace the
HDD with a normal one.
3.12 Transition
At the occurrence of a fault, the logical drives may be degraded and recovered by a hot spare
rebuild. This results in the separation of the configured slot positions of the logical drives.
However, creating before hand spare drives of a revertible type (see "3.15 Creating or Deleting
Spare Drives") allows the logical drives to be returned to their original slot positions.
- 64 -