User guide

Appendix B Report Monitoring
When you want to install the ESMPRO/AlertManager feature after installing NEC ESMPRO
Manager, the following settings may be required. It depends on the environment as described
below.
 To display the event messages on the NEC ESMPRO Manager operating on a machine
other than the server to which the RAID system is connected, follow the procedure below on
the machine.
 To display the event messages on the NEC ESMPRO Manager operating on the server to
which the RAID system is connected, no setting is required.
1. Insert the CD-ROM into the CD-ROM drive of the computer..
2. Start "\WEBPAMPR\WPMALERT\WPMMANEN.EXE" in the NEC
EXPRESSBUILDER CD-ROM.
3. Click [Yes].
NOTE: If you click [No], the operation terminates
without setting.
4. Click [OK].
5. Reboot the system.
- 82 -