User manual

WebPAM User Manual
96
Two items should be present and working properly.
• SCSI Host Adapter
• Promise SCSI RAID Controller
4. If the SCSI Host Adapter does not appear, or appears but is not
working, remove and reinstall the SCSI Host Adapter and its driver.
If the Promise SCSI RAID Controller does not appear, or appears
but is not working, reinstall the driver from the UltraTrak CD.
 Verify that the CIMOM software was installed on the RAID PC. Go to
Windows Services and verify that the CIMOM Server and
PromiseCIMOM services are present and running.
Figure 119. CIMOM and PromiseCIMOM Services.
If they are not present, reinstall WebPAM. If they are present but not
running, start them.