User manual

19
Chapter 3: Initial Setup
After you have completed your WebPAM installation, you must setup
Browser to work with your RAID.
Before you start, collect the IP addresses or Hostnames of the Utility
Server PC and all of the RAID PCs.
Appendix B of this manual describes how to locate a PC’s hostname
and IP address.
The first time you connect to the Utility Server, you must log in as the
Administrator and type in the Administrator’s password. If this
requirement presents a security concern, have the System Administrator
perform the initial connections.
Initial Log-in
Figure 14. Browser Icons on the Desktop.
1. Launch your Browser.
Figure 15. Browser Address Fields, Internet Explorer (top) and
Netscape Navigator (bottom).
2. In the Browser address field, type in the IP Address or Hostname of
the Utility Server PC, as explained below.