User manual

WebPAM User Manual
40
Enclosure
Figure 48. Enclosure Window.
Click on an Enclosure
icon to see the Enclosure Window. This
window displays the:
Enclosure Type
– Lists the model of enclosure, in this case an
UltraTrak RM4000.
Fan Speeds – Each drive in the enclosure has a cooling fan. Above
2,000 rpm is normal speed. When a fan turns slowly or stops, it requires
attention.
Temperature
– 30°C (86°F) is normal. Each sensor displays a reading.
If the temperature climbs above 52°C (124°F), it may be due to a broken
fan or blocked cooling passages and requires attention.
Power Status
– Shows the voltages of the 12- and 5-volt circuits inside
the enclosure. If these voltages are above or below specification, there
may be a problem with the power supply.
The next Chapter contains explanations of how to perform specific
tasks.
Event Window
The Event Window is your monitoring point with WebPAM. All RAID
functions are reported here as they happen. These include the sameall
events shown in the Event Log and some more events like
synchronization / initialization / rebuilding completed % but they are
limited to the Host (RAID PC) selected in Tree View. The Event Window