User manual

WebPAM User Manual
76
Disk View
The Disk View represents all the disk drives available to the Controller,
whether or not they are assigned to an Array. By way of contrast, an
Array View shows only the disk drives assigned to it. Click on the Disk
View
icon to see the Disk View Management Window (below).
Figure 100. The Disk View Management Window.
The Disk View Management Window provides a quick view of disk drive
model, size and status. Any problems are reported as shown below:
Figure 101. Disk Drive Problems.
In the example above, the warning
icons direct your attention to a
disk drive being rebuilt after a failure.
Less obvious is the fact that there is no disk drive reported in Channel 1.
If there is no drive installed on that Channel, this appearance is normal.
However, if a drive was installed on a Channel but that Channel does
not appear in Disk View, it means the drive either failed or was removed.
Figure 102. Disk Drive Information.