Product manual

VessRAID 1000s Series Product Manual
200
Managing SAS Connections
SAS connections deal with the VessRAID’s two host data ports.
• Viewing SAS Port Information (page 200)
• Making SAS Port Settings (page 200)
To add a SAS initiator, see “Adding an Initiator” on page 68 (WebPAM PROe) or
page 167 (CLU).
Viewing SAS Port Information
The SAS Controller has one SAS channel. The SAS channel has two ports.
See “Making Data and Management Connections” on page 18 for information
about how these ports are physically connected to the Host PC.
To view information about the SAS ports:
1. Press the or button until the display says SAS Management.
2. Press the button and the display says SAS Port Info.
3. Press the button again and the display says SAS Port 1.
• Press the button again to see SAS Port 1.
• Press button and the button to see SAS Port 1.
If it says Link Status Down, reconnect to the network before preceding.
4. Press the or button to scroll through the port information.
• Link Status
•Port Type
• Link Speed
• SAS Address
• Signal Strength
Making SAS Port Settings
The SAS Controller has one SAS channel. The SAS channel has two ports.
See “Making Data and Management Connections” on page 18 for information
about how these ports are physically connected to the Host PC.
To make settings to the SAS ports:
1. Press the or button until the display says SAS Management.
2. Press the button and the display says SAS Port Info.
3. Press the button again and the display says SAS Port 1.
• Press the button again to choose SAS Port 1.