Manualshelf

Product manual

ManualsBrandsPromise Technology ManualsRAID controllersVessRAID 1000s Series
31323334353637383940
VessRAID 1000f, 1000i, 1000s Series Product Manual
12
For a description of the LEDs, see pages 35 and 37.
Installing the LCD Panel (Optional)
The LCD panel mounts to the left ear of the VessRAID enclosure.
1. Align the connector on the left bracket of the VessRAID enclosure to the
connector on the back of the LCD panel, as shown in Figure 1.
Figure 1. Align the connectors on the enclosure and the LCD panel
2. Insert the two screws that you removed in step 1 through the holes in the left
bracket and into the threaded holes in the LCD panel, as shown in Figure 2.
Caution
• There is a risk of explosion if the battery is replaced by the
incorrect type.
• Dispose of used batteries according to the instructions that
accompany the battery.
Cautions
• The LCD panel is NOT a hot-swap device. Be sure the
VessRAID is powered down before you connect or disconnect
the LCD panel.
• You must install the LCD panel before you mount the
VessRAID subsystem in a rack.