Product manual

Chapter 10: Troubleshooting
383
Blowers are functioning
normally
Normal.
Blowers are NOT installed Reinstall the fan. If the fan does not turn, replace it.
See page 321.
Blower status is unknown Check for airflow out of the cooling unit. If there is
none, check for proper installation.
Cache
BBU flushing has started VessRAID’s cache is being flushed.
BBU flushing has ended VessRAID’s cache has been flushed.
BBU flushing has failed VessRAID’s cache could not be flushed. Check your
cache flush interval setting. See page 136 (WebPAM
PROe) or page 217 (CLU).
Controller
The controller
parameter(s) changed by
user
The user successfully changed controller settings.
See page 136 (WebPAM PROe) or page 217 (CLU).
The controller has new
crash information
Check the event logs. See page 69 and 70 (WebPAM
PROe) or page 266 (CLU)
Controller temperature is
above the threshold/
warning threshold
The VessRAID controller is overheating. Check for
airflow around and through the controller, and verify
that all fans are working. Replace fans as needed.
Controller temperature is
above the critical
threshold
The VessRAID controller is seriously overheating.
Check for airflow around and through the controller,
and verify that all fans are working. Replace fans as
needed.
Disk Array
New disk array has been
created
Result of settings or user action. Normal.
Disk array has been
deleted
Result of settings or user action. Normal.
Disk array has been
added
Result of settings or user action. Normal.
Disk array has been
removed
The physical drives of the disk array were removed
from the enclosure.
Disk array settings have
been changed
The user successfully disk array settings. See
page 160 (WebPAM PROe) or page 235 (CLU).
Reported Event Corrective Action