VTRAK M-CLASS Product Manual

VTrak M-Class Product Manual
108
2. Click on the Administration Tools icon.
3. Click on the Netsend link.
4. Under Startup Type:
• Click on the Automatic option to start the service automatically during
system startup.
• Click on the Manual option to start the service manually (the service
does not start during system startup).
5. Click on the Submit button.
Add Recipients
To add recipients of Netsend messages:
1. Click on the Subsystem icon in Tree view.
2. Click on the Administration Tools icon.
3. Click on the Netsend link.
4. Enter the recipient PC’s IP address in the Recipient IP Address field.
5. Under Recipient filter, select the lowest level of Severity to be reported for
each event.
The selected level plus all higher levels of Severity will be reported:
• Information – Information only, no action is required
• Warning – User can decide whether or not action is required
• Minor – Action is needed but the condition is not a serious at this time
• Major – Action is needed now
• Critical – Action is needed now and the implications of the condition are
serious
• Fatal – Non-Recoverable error or failure has occurred
6. Click the Update button to add the new recipient to the list
7. When you are done, click on the Submit button.
Delete Recipients
To delete recipients of Netsend messages:
1. Click on the Subsystem icon in Tree view.
2. Click on the Administration Tools icon.
3. Click on the Netsend link.
4. Highlight the recipient you want to delete in the recipient list.
5. Click the Delete button to remove the recipient from the list.
6. When you are done, click on the Submit button.