VTRAK M-CLASS Product Manual

VTrak M-Class Product Manual
262
To make alarm settings or cancel an alarm, see page 121 (WebPAM PROe) or
page 214 (CLU).
LEDs Display Amber or Red
Front Panel
When the power is switched on, the LEDs on the front of the VTrak will light up.
Figure 1. VTrak M500f/i/p Front Panel LEDs
Figure 2. VTrak M300f/i/p and M200f/i/p front panel LEDs
When boot-up is finished and the VTrak is functioning normally:
• Controller LED blinks green once per second for five seconds, goes dark for
ten seconds, then blinks green once per second for five seconds again.
• Power, FRU, and Logical Drive LEDs display green continuously.
Power
FRU
Status
Logical Drive
Status
FC/iSCSI/
SCSI-1
Activity
FC/iSCSI/
SCSI-2
Activity
Controller
Heartbeat
Power
FC/iSCSI/SCSI-2 Activity
FRU Status
Logical Drive Status
FC/iSCSI/SCSI-1 Activity
Controller Heartbeat