VTRAK M-CLASS Product Manual

Chapter 8: Troubleshooting
275
Host-interface controller
has detected bus reset
The initiator sent a reset command. If this message
appears repeatedly, contact Technical Support. See
page 299.
Host-interface controller
has encountered an
unrecoverable error
Restart the VTrak. See page 218.
Host-interface controller
has received an abort-
task/ abort task set/clear
task set command.
Result of user action. Normal.
Host-interface controller
has received an clear
ACA command.
Result of clearing an auto contingent alliance
condition. If this message appears repeatedly,
contact Technical Support. See page 299.
Host-interface controller
has received a LUN reset
command.
Result of user action. Normal.
Host-interface controller is
informed that the initiator
detected an error.
A FC/iSCSI error occurred. If this message appears
repeatedly, contact Technical Support. See
page 299.
Host-interface controller
has received illegal
secondary identification
A FC/iSCSI target received a second identify
message with a different LUN. If this message
appears repeatedly, contact Technical Support. See
page 299.
Host-interface controller
has received a message
parity error
A FC/iSCSI message parity error. If this message
appears repeatedly, contact Technical Support. See
page 299.
Host-interface controller
has received a bus reboot
The VTrak rebooted itself. If this message appears
repeatedly, contact Technical Support. See
page 299.
Host-interface controller
has encountered an
unknown error
An unidentified error occurred. If this message
appears repeatedly, contact Technical Support. See
page 299.
Host-interface controller
has encountered a
system error
A VTrak system error occurred. If this message
appears repeatedly, contact Technical Support. See
page 299.
Host-interface controller
has encountered a fatal
error
Restart the VTrak. See page 218. If this message
appears repeatedly, contact Technical Support. See
page 299.
Event Action