VTRAK M-CLASS Product Manual

VTrak M-Class Product Manual
60
Figure 4. VTrak M300f/i/p and M200f/i/p disk carrier LEDs
The VTrak spins up the disk drives sequentially in order to equalize power draw
during start-up. After a few moments the Power/Activity and Disk Status LEDs
should display green.
See “Critical & Offline Disk Arrays” on page 286 for a discussion of rebuilding and
failed disk drives.
Audible Alarm
VTrak’s alarm has five different patterns, as shown below.
When you first power-up the VTrak, it beeps twice to show normal operation.
LEDs
State
Dark
Steady
Green
Flashing
Green
Amber Red
Power/
Activity
No Drive
Drive
Present
Activity n/a n/a
Status
No Power/
No Drive
Drive OK n/a
Drive
Rebuilding
Drive
Error
“n/a” means this state does not apply to this LED.
Disk Status
Power/Activity
.25s.25s.25s
.25s.25s
.25s.25s
.25s.25s .25s
.25s
.25s
.5s
.25s
.5s
.75s
.25s
.75s
.25s
.75s
1s 1.25s
2.5s
3s
1x
2x
1
2
3
4
5
6s
s
8