VTRAK M-CLASS Product Manual

VTrak M-Class Product Manual
82
Management Port
The Network Management–Ethernet tab enables you to see the current
Management Port settings on the Controller, including:
• Controller ID
• Maximum number of ports supported
• Number of ports present
• Number of failed ports
• Port ID
• Port status (enabled or disabled)
• Link status (up or down)
•IP type
• DHCP status (enabled or disabled)
• Primary IP address
• Primary subnet mask
• Default gateway IP address
• Automatic Domain Name Service (DNS) through DHCP (yes or no)
• Primary DNS server IP address
• Primary MAC address
• Maximum speed supported by this connection
To make changes to the Management Port settings:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click on the Network Management icon.
4. Click the Port 1 link in Management View.
5. To enable DHCP, check the DHCP box.
When DHCP is NOT enabled, enter the following:
• Primary IP address
• Primary subnet mask
• Default gateway IP address
• Enter a primary DNS server IP address.
6. Click the Submit button.
iSCSI Data Ports
The Network Management–iSCSI tab enables you to see the current Data Port
settings on the Controller, including: