VTRAK M-CLASS Product Manual

VTrak M-Class Product Manual
84
• Firmware Version
• Number of failed nodes
• Supported Features
• Maximum Frame Size
• Supported Speeds
To access this tab:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click on the Fibre Channel Management icon.
4. Click the Node tab in Management View.
Fibre Channel Port
The Fibre Channel Management–Port tab enables you to see the current Data
Port settings on the Controller, including:
• State – Online, Offline, Unknown
• Port Identifier – A hexadecimal name for this port
• Topology Attached – Fabric Direct, Fabric Loop, Unknown
• WWNN – World Wide Node Name
• WWPN – World Wide Port Name
• Current Speed – 2 GB or 1 GB
• Link Type – Long-wave laser, short-wave laser or electrical
• Symbolic Name – A text name for this port
• Configured Link Speed
• Configured Topology
• Hard ALPA – Address can be 0 to 254. 255 means this feature is disabled
To access this tab:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click on the Fibre Channel Management icon.
4. Click the Port tab in Management View
Fibre Channel Port Settings
The Fibre Channel Management–Port tab enables you to make Data Port
settings on the Controller, including:
• Configured Link Speed – 2 GB, 1 GB or Auto (self-setting)