Product manual

228
VTrak A-Class Product Manual Promise Technologies
ups
Usage
ups[-a<action>]
ups-alist[-v]
ups-amod-s“<listofsettings>”
Summary
The ups command allows a user to view and modify ups status and settings. Network UPS
is supported for IPv4 protocol only.
Options
-a<action> Whichactiontoperform.
list (Default)DisplaysallcurrentUPSstatus.
mod ChangethesettingsforUPS.
-s“<option>=<value>” Usedtospecifywhatoptionstochange.
detection= Detectionmodesetting
auto (Default.WheneveraUPSisdetected,itchangesthedetection
 modeto“enable”.)
enable (MonitorsUPS,UPSSettingschanges,reportswarningsandlogs
 events.)
disable (MonitorsSerialUPSonly.)
ups1= UPS1IPaddressorDomainName.
ups2= UPS2IPaddressorDomainName.