Product manual
76
VTrak A-Class Product Manual Promise Technologies
CrEatE vtrak noDE aLias
To create an alias for any VTrak node:
1. Go to SAN > Detail menu tab
2. Click on the Note icon, type in the name for the Alias.
3. Click on the Save button.
ShutdOwn Vtrak nOde
To shutdown any VTrak node:
1. Go to SAN > Detail menu tab
2. Click on the
Gear
icon.
3. Select the
Shutdown
option. A conrmation is required.
4. Allow at least 5 minutes for the system to completely shutdown before switching off the power supplies.
reStOre Vtrak deFault SettingS
When factory default settings are restored, logical settings including IP settings and administration settings are
restored to factory default settings. To restore a VTrak node to its factory default settings:
1. Go to SAN > Detail menu tab
2. Click on the
Gear
icon.
3. Select the
Restore Factory Default Settings
option. A conrmation is required.
4. Settings are restored to factory default. It takes a few minutes to complete.
rEFrEsh Lun MaPPing anD Masking
To refresh LUN Mapping and Masking:
1. Go to SAN > Detail menu tab
2. Click on the Gear icon and select the
Refresh LMM
option.
3. Click on the Save button.