Product manual

Chapter 4: Management with WebPAM PROe
101
To make maintenance mode settings:
1. Click the Device tab.
2. Click the Network Management icon.
3. Click the Maintenance Mode tab.
4. Click the controller and protocol family whose settings you want to change
and click the Configuration button.
5. Make the following settings are needed:
• Check the Enable box to enable this protocol family.
• Check the Enable DHCP box to enable a DHCP server to make your
network settings. DHCP is currently supported in IPv4 only.
• For manual network settings, type the controller’s IP address, subnet
mask, gateway IP address, and DNS server IP address into the fields
provided.
6. Click the Submit button.