Product manual

Chapter 4: Management with WebPAM PROe
127
4. Click the Confirm button.
To start the Webserver service after stopping it:
1. Click the Administration tab.
2. Click the Services icon.
3. Click the Webserver service and click the Start button.
Restarting Webserver Service
1. Click the Administration tab.
2. Click the Services icon.
3. Click the Webserver service and click the Restart button.
Making Webserver Settings
To change Webserver service settings:
1. Click the Administration tab.
2. Click the Services icon.
3. Click the Webserver service and click the Settings button.
4. Make settings changes as required:
• Choose a startup type,
• Automatic – (default) Starts and runs with the subsystem.
• Manual – You start the service when you need it.
• Session Time Out – Default is 24 minutes.
5. Click the Save button.
6. Click the Confirm button.
Telnet Service
Telnet service enables you to access the RAID subsystem’s Command Line
Interface (CLI) through a network connection.
Stopping Telnet Service
To stop the Telnet service:
1. Click the Administration tab.
2. Click the Services icon.
3. Click the Telnet service and click the Stop button.
4. Click the Confirm button.
To start the Telnet service after stopping it:
1. Click the Administration tab.
2. Click the Services icon.