Product manual

VTrak E-Class Product Manual
128
3. Click the Telnet service and click the Start button.
Restarting Telnet Service
To restart the Telnet service:
1. Click the Administration tab.
2. Click the Services icon.
3. Click the Telnet service and click the Restart button.
Making Telnet Settings
To change Telnet service settings:
1. Click the Administration tab.
2. Click the Services icon.
3. Click the Telnet service and click the Settings button.
4. Make settings changes as required:
• Choose a startup type,
• Automatic – (default) Starts and runs with the subsystem.
• Manual – You start the service when you need it.
• Port number – Default is 2300.
• Max Number of Concurrent Connections – Default is 4.
Maximum number is 4.
• Session Time Out – Default is 24 minutes.
5. Click the Save button.
6. Click the Confirm button.
SSH Service
Secure Shell (SSH) service enables you to access the subsystem’s Command
Line Interface (CLI) through a network connection.
Stopping SSH Service
To stop the SSH service:
1. Click the Administration tab.
2. Click the Services icon.
3. Click the SSH service and click the Stop button.
4. Click the Confirm button.
To start the SSH service after stopping it:
1. Click the Administration tab.
2. Click the Services icon.