Product manual

VTrak E-Class Product Manual
130
3. Click the SNMP service and click the Start button.
Restarting SNMP Service
To restart the SNMP service:
1. Click the Administration tab.
2. Click the Services icon.
3. Click the SNMP service and click the Restart button.
Making SNMP Settings
To change SNMP service settings:
1. Click the Administration tab.
2. Click the Services icon.
3. Click the SNMP service and click the Settings button.
4. Make settings changes as required:
• Choose a startup type,
• Automatic – (default) Starts and runs with the subsystem.
• Manual – You start the service when you need it.
• Port Number – Default is 161.
• System Name – No default.
• System Location – Default is USA.
• System Contact – Default is [e-mail].
• Read Community – Default is public.
• Write Community – Default is private. No changes are possible.
5. Click the Save button.
6. Click the Confirm button.
Adding an SNMP Trap Sink
To add a trap sink:
1. Click the Administration tab.
2. Click the Services icon.
3. Click the SNMP service and click the Settings button.
4. Enter a trap sink server IP address in the field provided.
5. Choose a trap filter (event severity level).
See the table on the next page.
6. Click the Add button.
7. Click the Confirm button.