Product manual

VTrak E-Class Product Manual
146
5. Click the Save Advanced SMART Log button.
Your browser saves a text file containing the SMART Log to its designated
download folder.
Locating a Physical Drive
This feature causes the drive carrier LEDs to blink for one minute to assist you in
locating the physical drive, and is supported by RAID subsystems and JBOD
expansion units.
To locate a physical drive:
1. Click the Device tab.
2. Click the Physical Drive icon.
3. Click the physical drive you want, then click the Locate button.
The drive carrier status LED flashes for one minute.
Figure 4. Drive carrier status LED
Forcing a Physical Drive Offline
This feature applies only to physical drives assigned to disk arrays.
To force a physical drive offline:
1. Click the Device tab.
2. Click the Physical Drive icon.
3. Click the down arrow button to list the physical drives in the enclosure.
Caution
Forcing a physical drive offline is likely to cause data loss. Back up
your data before you proceed. Use this function only when
required.
Important
Forcing a physical drive offline causes your logical drives to
become degraded. If Auto Rebuild is enabled and a spare drive is
available, the disk array begins rebuilding itself automatically.
Green LED
flashes