Product manual

VTrak E-Class Product Manual

162

Managing Logical Drives

Logical drive management includes:

• Viewing a List of Logical Drives (below)

• Viewing Logical Drive Information (page 163)

• Viewing Logical Drive Statistics (page 164)

• Viewing Logical Drive Check Tables (page 164)

• Creating a Logical Drive Manually (page 165)

• Deleting a Logical Drive (page 166)

• Making Logical Drive Settings (page 166)

• Locating a Logical Drive (page 167)

• Initializing a Logical Drive (page 167)

• Redundancy Check on a Logical Drive (page 168)

• Migrating a Logical Drive’s RAID Level (page 169)

• Creating a LUN Clone (page 170)

Also see Disk Array and Logical Drive Problems (page 400).

Viewing a List of Logical Drives

To view a list of logical drives:

1. Click the Storage tab.

2. Click the Logical Drive icon.

The list of logical drives appears.

Logical Drive information includes:

• ID – LD0, LD1, LD2, etc.

• Alias – If assigned.

• Status – A green check icon means OK.

• Capacity – Data capacity of the logical drive.

• RAID Level – Set when the logical drive was created.

• Stripe – Set when the logical drive was created.

• Cache Policy – Read cache and Write cache settings.

• Array ID – ID number of the disk array where this logical drive was

created.