Product manual

Chapter 4: Management with WebPAM PROe
181
A maximum of 1024 logical drives can be mapped to an FC initiator or port, or to
an iSCSI initiator or target.
To assign a LUN to an initiator, add the initiator first. See “Adding an FC Initiator”
on page 177 or “Adding an iSCSI Initiator” on page 178.
LUN masking must be enabled in order to map a LUN. See “Enabling and
Disabling LUN Masking” on page 183.
To add a LUN map:
1. Click the Storage tab.
2. Click the LUN Mapping & Masking icon.
3. Beside Active LUN Mapping Type,
• FC subsystems, choose the Initiator or Port option.
• iSCSI subsystems, choose the Initiator or Target option.
If you change the LUN Mapping Type, in the popup message type “confirm”
and click the Confirm button.
4. Click the LUN Mapping button.
The first LUN Mapping screen appears.
This screen lets you choose initiators, ports, or targets, depending on the
Active LUN Mapping Type.
5. Click the dropdown menu to choose the initiators, ports, or targets you want
for the LUN map.
Choose your initiators, ports, or targets individually or choose all of them.
6. Click the Next button.
The second LUN Mapping screen appears.
7. Click a logical drive to highlight it. Then click the < button to assign the
logical drive to an initiator or port.
Or click the << button to assign all logical drives to an initiator or port.
The logical drive moves to the Initiator, Port, or Target list with a default LUN
of 0. Type the LUN you want to assign to this initiator, from 0 to 255.
Each logical drive can have only one unique LUN.
8. Click the Next button.
The final LUN Mapping screen appears showing the initiator or port and LUN
map.
9. Click the Submit button.
The new LUN map is created.