Product manual

Chapter 4: Management with WebPAM PROe
183
To change the active LUN mapping type:
1. Click the Storage tab.
2. Click the LUN Mapping & Masking icon.
The list of LUN maps appears.
3. Beside Active LUN Mapping Type:
• FC subsystems, choose the Initiator or Port option.
• iSCSI subsystems, choose the Initiator or Target option.
When you change the LUN map type, a popup message appears.
4. In the popup message type “confirm” and click the Confirm button.
Enabling and Disabling LUN Masking
LUN masking must be enabled in order to assign map your LUNs to your
initiators and to use your existing LUN maps.
Disabling LUN masking allows all initiators to access all LUNs in your data
storage. However, disabling LUN masking does not delete existing LUN maps.
These actions require Administrator or Super User privileges.
To enable or disable LUN masking:
1. Click the Storage tab.
2. Click the LUN Mapping & Masking icon.
3. Check the box to enable LUN Masking.
Or uncheck the box to disable LUN Masking.
LUN Masking starts or stops as soon as you make your setting.