Product manual

VTrak E-Class Product Manual
194
Items marked with an asterisk (*) are adjustable under “Making iSCSI Portal
Settings” on page 194.
Adding iSCSI Portals
VTrak supports up to 32 iSCSI portals per iSCSI port. Each iSCSI portal can
belong to a different VLAN for a maximum of 32 VLANs.
If you plan to associate the new portal with a trunk, create the trunk first. See
“Adding iSCSI Trunks” on page 197.
For more information about iSCSI VLANs, see “iSCSI on a VLAN” on page 368.
To add a portal:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Portal tab.
4. Click the Create Portal button.
5. Make your choices and inputs as required:
• Choose an Association type from the option list.
The choices are PHY, Trunk, or VLAN.
• If you are creating a PHY or VLAN association, choose
• Controller ID (1 or 2) from the dropdown menu.
• Choose a Port ID (1 to 4) from the dropdown menu.
• If you are creating a Trunk association, choose a Trunk ID (1 to 8) from
the dropdown menu.
• Type the IP address of the portal in the field provided.
• Type the subnet mask of the portal in the field provided.
• If you are creating a VLAN association, enter a VLAN tag (0 to 4094) in
the field provided.
• From the IP Type dropdown menu, choose IPv4 or IPv6.
DHCP is currently supported only for IPv4.
6. Click the Submit button.
The new portal is added to the list.
To assign a portal to a target, see “Assigning a Portal to an iSCSI Target” on
page 159.
Making iSCSI Portal Settings
To make iSCSI portal settings:
1. Click the Device tab.