Product manual

Chapter 4: Management with WebPAM PROe
195
2. Click the iSCSI Management icon.
3. Click the Portal tab.
4. Click the portal you want, then click the Settings button.
5. Make settings changes as needed:
• If you have a Trunk association, choose a Trunk ID (1 to 8) from the
dropdown menu.
• Type the IP address of the portal in the field provided.
• Type the subnet mask of the portal in the field provided.
• If you have a VLAN association, enter a VLAN tag (0 to 4094) in the field
provided.
• From the IP Type dropdown menu, choose IPv4 or IPv6.
DHCP is currently supported only for IPv4.
6. Click the Submit button.
Deleting iSCSI Portals
To delete an iSCSI portal:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Portal tab.
4. Click the portal you want, then click the Delete button.
5. In the Confirmation box, type the word “confirm” in the field provided and
click the Confirm button.
The portal is removed from the list.
Viewing a List of iSCSI Ports
An iSCSI port is the physical iSCSI connection on the VTrak. There are four
iSCSI ports on each RAID controller for a total of eight per subsystem.
To view a list of ports:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Port tab.
Port information includes:
• Port ID – ID number of the port
• Controller ID – 1 or 2
• Link Status – Up or down, active or Inactive
• Port Status – Enabled or disabled*