Product manual

VTrak E-Class Product Manual
196
• Jumbo Frames – Enabled or disabled*
• Current Speed – In Mb/s
• Assigned Portals – Portals to which this port is assigned
Items marked with an asterisk (*) are adjustable under “Making iSCSI Port
Settings” on page 196
Viewing iSCSI Port Information
To view information about a port:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Port tab.
4. Click the port you want, then click the View button.
Port information includes:
• Controller ID – ID of the RAID controller where the port is located
• Status – Enabled or disabled*
• Jumbo Frames – Enabled or disabled*
• Link Status – Up or down, active or inactive
• MAC Address – MAC address of the target port
• Max Supported Speed – Maximum speed supported (1 Gb/s)
• Current Speed – Current or actual speed of the target port
• Relative Portals – The portals corresponding to this target port
Items marked with an asterisk (*) are adjustable under “Making iSCSI Port
Settings” on page 196.
Making iSCSI Port Settings
To make iSCSI port settings:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Port tab.
4. Click the port you want, then click the Settings button.
5. Make settings changes as required:
• Enable Port – Check to enable this port. Uncheck to disable.
• Jumbo Frames – Check to enable jumbo frame support on this port.
Uncheck to disable.
6. Click the Submit button.