Product manual

Chapter 4: Management with WebPAM PROe
199
Viewing iSCSI Session Information
To view a list of iSCSI sessions:
1. Click the Device tab.
2. Click the iSCSI Management icon.
3. Click the Session tab.
4. Click the iSCSI session you want and click the View button.
Information includes:
• Session ID – ID number of the
session
• Status – Active or inactive
•Target Alias
• Initiator Name – iSCSI qualified
name (iqn)
• Portal IP – IP address of the
portal
• Device Type – Initiator or target
• Target Portal Group – ID
number
• TSIH – Target session
identifying handle
• Execution Throttle – Max
number of outstanding
commands on any one port
• Max Outstanding R2T –
Number of PDUs ready to
transfer
• Default Time to Retain – In
seconds
• Max Burst Length – In bytes
• Initial R2T – Enabled or
disabled
• Data Digest – Enabled or
disabled
• Data PDU in Order – Enabled
or disabled
• Portal ID – ID number of the
portal
• Keep Alive – Enabled or
disabled
• Target Name – iSCSI qualified
name (iqn)
• Initiator IP – IP address of the
initiator
• Device Access Control –
Enabled or disabled
• Initiator Source Port – ID
number
• ISID – Initiator session ID
number
• Max Rcv Data Seg Length –
Receive data segment length
• First Burst Length
– In bytes
• Default Time to Wait – In
seconds
• Immediate Data – Enabled or
disabled
• Header Digest – Enabled or
disabled
• CHAP Authentication Type –
None, Local, Peer
• Data Seq in Order – Enabled or
disabled