Product manual

VTrak E-Class Product Manual
18
Mounting rails are included with the VTrak.
To install the VTrak subsystem into your rack:
1. Attach the mounting rail assemblies to the rack posts, using screws and nuts
from your rack system.
• The rail halves are riveted together and use no adjustment screws.
• The front-left and front-right mounting rail ends are labeled.
Figure 1. Installing the rails onto your rack
• All rail ends, front and rear, attach at the outside of the rack posts.
• The guide pins at the rail ends align with the holes in the rack posts.
• Tighten the screws and nuts according to instructions for your rack
system.
Front left label
Front right label
Support flange on the front
end of each rail
Guide pins on the rails align with the
holes in the rack post