Product manual

Chapter 2: Installation
19
Figure 2. Rail ends attach to the outside of each post
2. Place the VTrak subsystem onto the rails.
• At least two persons are required to safely lift the VTrak.
• Lift the VTrak subsystem itself. Do not lift the VTrak by its brackets.
Figure 3. Placing the VTrak subsystem onto the rack rails
3. Secure the VTrak subsystem to the rack.
• The VTrak attaches to the rack posts using the included screws and
flange nuts.
• Use the attaching screws and flange nuts that came with the VTrak.
Rail ends attach on the outside of
the front and rear rack posts
Rails installed and tightened
VTrak subsystem
Brackets