Product manual

VTrak E-Class Product Manual
260
Using the CLU, you must assign a portal to a target when you create the target.
To add an iSCSI target:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI Targets and press Enter.
The list of iSCSI Targets displays.
3. Highlight Create New Target and press Enter.
4. Optional. Highlight TargetAlias and type an alias into the field provided.
5. Highlight each item and press the Spacebar to toggle between Enable and
Disable.
• HeaderDigest – Adds a header digest (CRC).
• DataDigest – Adds a data digest (CRC).
• UniCHAPAuthen – Enables uni-directional (peer) CHAP authentication.
• BiCHAPAuthen – Enables bi-directional (local) CHAP authentication.
Authentication requires a pre-existing CHAP.
6. Highlight Save Settings and Continue and press Enter.
The Add Portals screen appears.
7. Highlight each portal that you want to assign to the new target and press the
Spacebar to mark it.
8. When you have maked the portals you want, highlight Save Settings and
press Enter.
The new target appears in the list.
Making iSCSI Target Settings
To make target settings:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI Targets and press Enter.
The list of iSCSI Targets displays.
3. Highlight the target you want to change and press Enter.
The target information screen displays.
4. Highlight iSCSI Target Settings and press Enter.
5. Make new settings as needed.
Note
Header digest and data digest work best with initiators equipped
with a TCP Offload Engine (TOE). Refer to your iSCSI HBA user
manual for more information.