Product manual

VTrak E-Class Product Manual
262
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI Ports and press Enter.
The list of ports appears with controller and port numbers.
Viewing iSCSI Port Information
To view information for an iSCSI target port:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI Ports and press Enter.
The list of ports appears with controller and port numbers.
3. Highlight the port you want to see and press Enter.
The target port information screen displays. Information includes:
• CtrlId – Controller ID (1 or 2)
• PortStatus – Port status, enabled or disabled*
• JumboFrame – Jumbo frames, enabled or disabled*
• LinkStatus – Link status, up or down, Active or Inactive
• MACAddress – MAC address of the target port
• MaxSupportedSpeed – Maximum speed supported (1 Gb/s)
• CurrentSpeed – Current or actual speed of the target port
• RelativePortals – The portals corresponding to this target port
Items marked with an asterisk (*) are adjustable under “Making iSCSI Port
Settings” below.
Making iSCSI Port Settings
To make port settings:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI Ports and press Enter.
The list of ports appears with controller and port numbers.
3. Highlight the port you want to change and press Enter.
The target port information screen displays.
4. Highlight iSCSI Port Settings and press Enter.
5. Highlight each item and press the Spacebar to toggle between Enable and
Disable as needed.
• PortEnable – Enables and disables the iSCSI port
• JumboFrame – Enables and disables jumbo frame support
6. Highlight Save Settings and press Enter.
7. Press Y to acknowledge possible interruption of iSCSI services.